Employee Details



Educational Qualification

Post-Doctorate (Structure)

National University of Singapore (NUS)

Singapore, May 2013-May 2014

Title: Structural analysis, design & optimum shape for 7-teeth rack & pinion for offshore jack-up rig

Adviser: Associate Professor Ang Kok Keng

                Professor Koh Chan Ghee

 

PhD

National University of Singapore (NUS)

Singapore

PhD in Civil Engineering, March 2013

Dissertation Title: Interface Mechanics of CNT and Nanorope Reinforced Composites

Advisor: Associate Professor Ang Kok Keng

 

Bangladesh University of Engineering and Technology (BUET) Bangladesh

BSc in Civil Engineering, June 2007

Thesis Title: Dynamic Behavior of Cable Stayed Bridge using Finite Element Method

Thesis Advisor: Professor Tahsin Reza Hossin

Working Experience/ Professional Experience

Research Experience

 

Military Institute of Science & Technology                                                                          

Department of Civil Engineering

Associate Professor; May 2014- Continue

Project-1: Impact Analysis of Aircraft Landing on Flexible Pavement using Abaqus

Project-2: Seismic vulnerability assessment for existing residential building in Dhaka

Project 3: Application of base isolation and damping against Earthquake

Project 4: Structural strengthening via retrofitting & jacketing

 

National University of Singapore (NUS)                                                                                  

Research Fellow, June 2013 – June 2014

Project-1 Title: Investigation of carbon nanotube in polymer using advanced computational techniques

Project-2 Title: Nano-indentation to determine mechanical properties of nanocomposites using advanced FEM

 

Singapore Amerine                                                                                                    

Research Engineer, February, 2013 – Present

Project Title: Structural analysis, design & optimum shape for 7-teeth rack & pinion for offshore jack-up rig

 

National University of Singapore (NUS)                                                                                 

PhD Research Scholar, January 2008–January 2012

Project Title: Interface mechanics of CNT and Nanorope reinforced polymer composites

 

Bangladesh University of Engineering and Technology (BUET), Bangladesh

Final Year Project, April 2006–May 2007

Project Title: Dynamic Behavior of Cable Stayed Bridge using Finite Element Method

 

Industrial Experience

 

Projects (Bangladesh)

  1. Proposed 9 storied office cum shopping center at kitchen Market, Mohakhali by DCC.
  2. Proposed 7 storied building at Abbas Garden, Mohakhali.
  3. Proposed Five Start Radisson Blue at Cox’s Bazar.
  4. 15 project on garments building for DEA.
  5. DCC Bridge on Washa Khal at Godiertek, Adabor for Dhaka North City Corporation.
  6. More than 20 residential building Mohakhali, Mirpur and Baridhara DOHS

 

Design Projects (Singapore)

1.  ER389 Enhancement of Braddell Road West Bound from CTE to Toa Payoh North Flyover

Land Transport Authority – Singapore

Analysis and Design of foundation, Road widening and strengthening, Pedestrian foot bridge

2.  Five Storey mixed development with an attic and Car park basement at 28 Seah Street, Singapore

Analysis and design of pile foundation, Civil Defence Shelter, Car park basement

3.  Proposed laboratory facilities at block N3.1,  N4.1 and N1.1 at Nanyang Avenue

Nanyang Technological University (NTU) -Singapore

Analysis and design of superstructure, Foundation design

4.  Proposed Slope protection and repair between LWN Library and Sim-Tech Tower

Nanyang technological university (NTU)-Singapore

Slope protection by using Geosynthetics, Drainage system design and Ground improvement

5.  Proposed additions to the existing dormitory at 49d Holland Road, Singapore

Fransican Missionaries of Mary-Singapore

Geotechnical foundation design

 

Design Check  (Singapore)

a.     Proposed a/a involving the addition of Modified Tafmer (MF) plant and shipping facilities to existing plant in existing petrochemical complex at 701 Ayer Merbau Road Singapore 627853

b.    Proposed extension of single-user industrial development comprising of packaging building, substation/ccr building, process unit, dryer/ dewatering and tank farm area atTembusu Road / Tembusu Drive, Jurong island for Lanxess butyl Singapore Pte Ltd

c.     Proposed erection of butyl polymerization unit, halogenation unit, i-plant, finishing and packaging buildings including ancillary facilities for single-user industrial development for Lanxess butyl Singapore Pte Ltd

d.    Proposed erection of a 6-storey multiuser research & development building with a basement car park at Cleantech view / Cleantech Loop (western water catchment)

e.     Proposed addition and alteration to existing seraya petrochemicals complex with addition of a Dpc plant at 61 seraya avenue for shell Chemicals Seraya Pte Ltd

f.      Proposed extension, additions and alterations to existing 4-storey Woodlands Ring Primary School at 11, Woodlands Ring Road (Woodlands Planning Area)

g.    Proposed erection of a 3-storey 66/22 kv substation at 32 Woodlands Height (Woodlands Planning Area)

h.    Proposed additions and alterations to existing 3-storey Nanyang Community Club with addition of a 4th storey at 60 Jurong West Street 91

i.      Proposed additions and alterations to existing HDB 2-storey Commercial Facilities (Rivervale Plaza) at Rivervale Drive

j.      Proposed equipment access platforms to existing steam turbine building at existing Senoko Power Station at 31 Senoko Road

Teaching Interest

Military Institute of Science & Technology                                                                          

Department of Civil Engineering

Associate Professor; May 2014- Continue

CE 101: Engineering Mechanics

CE311: Analysis & Design of Structure I

CE411: Analysis & Design of Structure III

CE319:Design of Steel Structures

CE419: Finite Element Analysis (LIN)

CE6109: Analysis & Design of Building Against Hazards

CE 6101: Finite Element Analysis I

National University of Singapore (NUS)                                                                                 

Department of Civil & Environmental Engineering

Teaching Assistant

Course Title: Structural Design & Materials (CE 2164)

Course Title: Engineering Mechanics (EG 1109)

Course Title: Computer Application in Civil Engineering; Micro station, AutoCAD & FORTRAN (CE 2409)

 

Publications

Journal

  1. Ahmed K. S. and Ang K. K, Interface characteristics of nanorope reinforced polymer composites. Computational Mechanics, 2013: 52, p. 571-85. DOI 10.1007/s00466-013-0833-z
  2. Ahmed K. S. and Ang K. K., A pull-out model for perfectly bonded carbon nanotube in polymer composite, Journal of Mechanics of Material and Structures,2012: 7 (8), 753-64, DOI: 10.2140/jomms.2012.7.753
  3. Ang K. K. and Ahmed K. S., An improved shear-lag model for carbon nanotube reinforced polymer composites. Composites Part B: Engineering, 2013;50, p.7-14. DOI:10.1016/j.compositesb.2013.01.016
  4. Ahmed K. S. and Ang K. K., Interface characteristics of carbon nanotube reinforced polymer composites using an advanced pull-out model, 2013: Computational Mechanics,DOI : 10.1007/s00466-013-0908-x
  5. Ahmed K. S. andAng K. K., Static crack propagation of carbon nanotube through non-bonded interface of nanocomposite, 2013. World Journal of Nano Science and Engineering, 4, 42-49, DOI:10.4236/wjnse.2014.42007
  6. Ahmed K. S. andAng K. K., Mechanical properties of perfectly bonded SWCNT reinforced composite by Berkovich nano-indentation using Advanced Finite Element Method, 2013. Composite Science & Technology (Under Submission)
  7. Ahmed K. S. and Ang K. K., Wall thickness dependency of mechanical properties of nanocomposites using FEM approach, 2013. Computational Mechanics (Under Submission)
  8. Ahmed K. S. and Ang K. K., Spherical nano-indentaiton for determining mechanical properties of MWCNT based nanocomposites, 2013. Composite Part b: Engineering (Under Preparation)

Conference

1.     Ahmed K. S., Ang K. K.; Load Transfer Mechanism of Nanotube Reinforced Composite Considering Coulomb Friction and Van der Walls Interactions. Proceedings of the Twenty-second KKCNN Symposium on Civil Engineering, October 31–November 2, 2009, The Imperial Mae Ping Hotel, Chiang Mai, Thailand, pp.331-336.

2.     Attended as guest in CORE‐NSRI SUBSEA SYMPOSIUM 2010:

Subsea Challenges; Tomorrow’s Technologies ‐ Industry and Academic Perspectives 19th February 2010, Engineering Auditorium, National University of Singapore

3.     Ahmed K. S., Ang K. K.; An Improved Pullout Model for Carbon Nanotube Reinforced Composites. Proceedings of the Twenty-third KKCNN Symposium on Civil Engineering, November 13–15, 2010, Taipei, Taiwan; pp.41-44.

4.     Ahmed K. S.,Ang K. K.; Interface Characteristics of Nano-rope Reinforced Composites, Proceedings of the Twenty-fourth KKCNN Symposium on Civil Engineering, December 14–16, 2011, Hyogo, Japan; pp293-296

5.     Ahmed K. S., Ang K. K.; Interface Crack Propagation of Chemically Non-bonded CNT in Polymer, 1st International Conference on Mechanics of Composites, June 8-12, 2014, Stony Brook University, NY, USA.

6.     Attended IABSE-JSCE Conference on Advances in Bridge Engineering-III

 

Book Publication

Ahmed K. S., Ahmed A. (2010), Floating Production Storage and Offloading; LAP Lambert AcademicPublishing; 108 Pages, ISBN 978-3-8383-3893-4

 

Seminar

Presented at least 10 seminars at NUS and international conferences

Attended more than 250 seminars on different part of Engineering and advanced Technology

 

Training Program

TRAINING (INSTRUCTOR/LECTURER)

(1)   Training Course on “Professional Building & Bridge Design Using ETABS & SAP2000”, from 12 Dec 2014 to 9 Jan 2015 at MIST

(2)   Training Course on “Professional Building Design Using ETABS 2015”, from 12 July 1 to July 9 2015 at MIST

(3)   Lecture on Analysis & Design of Building Structure against Fire, 6th OCT 2015 at House Building Research Institute (HBRI)

 

ATTENDED

(1)    Training Course on Fundamentals of Earthquake Resistant Building Design, arranged by BUET-JIDPUS on 26-28 February, 2015.

(2)    Training on software REVIT & ROBOT structure for Building Intelligence Model (BIM) organized by RJ Crocker Consultant Pte. Ltd in Singapore on August 2012

(3)    Training program for Teaching Assistants in October 2009 organized by Faculty of Engineering of National University of Singapore.

(4)    Training Program on Software ABS & DLA on hydrodynamics and fatigue analysis for offshore structure in 2010 organized by ABS Singapore

(5)    Training program on ‘Understating safety, health and environmental issues’ in September 2009 organized by Faculty of Engineering, National University of Singapore.

(6)    Training program on ‘Risk Assessment Application Training’ in October 2008 organized by Faculty of Engineering, National University of Singapore.

(7)    Training on Field Surveying organized by Bangladesh University of Engineering & Technology (BUET) in November 2004